Products

Chain-Turn

Applications: Airports, Parcel, Distribution Centers, Manufacturing, Food Products, and Clothing
Speeds up to 600 FPM
Heavy Duty loose belt technology
Belt Widths range up to 120”

Specifications and Sizes

Flat-Turn

Applications: Airports, Parcel, Distribution Centers, Manufacturing, Food Products, and Clothing
Speeds up to 550 FPM
Can transport small and large items
Various belt widths available up to 48”

Specifications and Sizes

Spiral-Turn

Applications: Airports, Parcel, Distribution Centers, Manufacturing, Food Products, and Clothing
Speeds up to 600 FPM
Chain, Flat, and Square Turns can be created into Spiral Turns.
Belt Widths range up to 120”
Elevation ranges from 24” per 90 Degrees

Specifications and Sizes

Square-Turn

Applications: Airports, Parcel, Distribution Centers, Manufacturing, Food Products, and Clothing
Speeds up to 600 FPM
Can transport small and large items
Various belt widths available up to 62”

Specifications and Sizes

Knife Roll-Turn

Applications: Manufacturing, Food, and small products
Speeds up to 250 FPM
Heavy Duty loose belt technology
Belt Widths range up to 120”
Endless belt construction for smooth operation

Specifications and Sizes

Chain Curves

Reliable chain driven powered belt curves and spiral inclines/declines.

Stainless steel models available to meet FDA and USDA specifications.

Specifications

FRAME CONSTRUCTION

Load capacity up to 40 lbs. per linear foot
12 Ga. standard. Heavier frame construction available
All exposed welds ground smooth for USDA applications

DRIVE SYSTEM

Shaft mounted gear reducer with flange mounted TEFC motor
Normal mounting at outside radius, discharge end
Number 50 flex chain with attachment links and hardened steel sprockets

BELT

2 ply belting RAV (standard) – oil, heat, grease resistent.
Others per customer specifications

PAINT

Air dry industrial enamel
Standard colors – tan, white, green, blue. Others available upon request

ACCESSORIES

Floor supports – 10 Ga. formed steel, welded construction, adjustable from 30″ to 36″ belt height, standard. Other sizes upon request
Ceiling hanger angles available
Side guards – 14 Ga. steel, no sharp edges – no charge

Load Speed Specification

Outside Radius Model Group	Outside Radius (Inches)	Maximum Load (Lbs)	Maximum Speed
AAA	30.375	120	120-200
AA	40.375	170	140-200
A	50.375	200	200-250
B	62.375	230	220-500
C	90.375	350	250-600

For large end rolls, multiply Maximum Load by 2

Options

FRAME
Large tapered end rolls for high speed conditions
Arcs – 15 degrees to 360 degrees
Belt widths to specifications
Stainless steel suitable for food applications
Relief rollers for greater than 40 lbs. per linear foot loading
Spiral construction

DRIVE
Flange mounted motor
Inside radius mounting where space is required
Variable speed – mechanical or electrical adjustable speed (DC or AC)
Slave drive – between two curves or PSC-Floturn supplied curve and straight section

BELT
FDA & USDA approved white nitrile
Ruff top or others upon request
USDA and FDA approved

SUPPORTS
Fixed belt heights from 8″ minimum
Foot locking portable floor supports

Model Code

Standard Models

SERIES

MODEL NO.

CONSTANT DIMENSION

36″	FTT 29 6	C = 35.5	29	6	32.5	4.30
	27 8	D = 36	27	8	31.5	4.18
	25 10	X = 1	25	10	30.5	4.06
	23 12	X = 1	23	12	29.5	3.93
	*21 14	X = 1	21	14	28.5	3.81
	19 16	X = 1	19	16	27.5	3.68
	17 18	X = 1	17	18	26.5	3.56
48″	FTT 41 6	C = 47.5	41	6	44.5	4.12
	39 8	D = 48	39	8	43.5	4.03
	37 10	X = 1	37	10	42.5	3.95
	*35 12		35	12	41.5	3.86
	33 14		33	14	40.5	3.77
	31 16		31	16	39.5	3.68
	29 18		29	18	38.5	3.60
	27 20		27	20	37.5	3.51
	25 22		25	22	36.5	3.42
	23 24		23	24	35.5	3.34
60″	FTT 47 12	C = 59.5	47	12	53.5	4.90
	45 14	D = 60	45	14	52.5	4.28
	43 16	X = 1	43	16	51.5	4.64
	39 20	X = 1	39	20	49.5	4.55
	*37 20	X = 1	37	22	48.5	4.47
	*35 24	X = 1	35	24	47.5	4.38
	33 26	X = 1	33	26	46.5	4..29
	31 28	X = 1	31	28	45.5	4.21
	*29 30	X = 1	29	30	44.5	4.12
	27 32	X = 1-3/16	27	32	43.5	4.03
	25 34	X = 1-3/16	25	34	42.5	3.95
	*23 36	X = 1-3/16	23	36	41.5	3.86
84″	FTT 65 18	C = 83.5	65	18	74.5	4.70
	63 20	D = 84	63	20	73.5	4.64
	61 22	X = 1	61	22	72.5	4.58
	59 24	X = 1	59	24	71.5	4.52
	57 26	X = 1	57	26	70.5	4.46
	55 28	X = 1	55	28	69.5	4.40
	*53 30	X = 1-3/16	53	30	68.5	4.34
	51 32	X = 1-3/16	51	32	67.5	4.28
	49 34	X = 1-3/16	49	34	66.5	4.22
	*47 36	X = 1-3/16	47	36	65.5	4.16
	45 38	X = 1-7/16	45	38	64.5	4.10
	43 40	X = 1-7/16	43	40	63.5	4.04
	41 42	X = 1-7/16	41	42	62.5	3.98
	39 44	X = 1-7/16	39	44	61.5	3.92
	37 46	X = 1-7/16	37	46	60.5	3.86
	*35 48	X = 1-7/16	35	48	59.5	3.80

* Components normally in stock

** Slight bearing protrusion at inside radius. Please consult factory for use with oversized product applications.

Flatop Curves

Unique patented design with no chain covers permits conveying products

wider than the belt. Allows oversized items to be conveyed smoothly.

Specifications

FRAME CONSTRUCTION

Load capacity up to 30 lbs. per linear foot

12 Ga. standard. Heavier frame construction available

All exposed welds ground smooth for USDA applications

DRIVE SYSTEM

Shaft mounted gear reducer with flange mounted TEFC motor

Normal mounting at outside radius, discharge end

No chain drive. Friction drive with lagged tapered pulley

BELT

2 ply rubber modified vinyl – oil, heat, grease resistant.

Fire retardant & others available

PAINT

Air dry industrial enamel

Standard colors – tan, white, green, blue. Others available upon request

ACCESSORIES

Floor supports – 10 Ga. formed steel, welded construction, adjustable from 30″ to 36″ belt height, standard. Other sizes upon request

Ceiling hanger angles available

Load/ Speed Specifications

Series	Maximum Load (Lbs)	Maximum Speed
36″	125	200
48″	175	300
60″	225	400
84″	250	400

(1) Based on 60 fpm speed
(2) Based on 10 lb. total load

Options

FRAME
Arcs – 15 degrees to 180 degrees
Belt widths up to 48″
Stainless steel suitable for food applications

DRIVE
Flange mounted motor
Inside radius mounting where space is required
Variable speed – mechanical or electrical adjustable speed (DC or AC)

BELT
FDA & USDA approved white nitrile
Ruff top or others upon request
USDA and FDA approved

SUPPORTS
Fixed belt heights from 8″ minimum
Foot locking portable floor supports

Model Code

Standard Models

SERIES

MODEL NO.

CONSTANT DIMENSION

36″	FTT 29 6	C = 35.5	29	6	32.5	4.30
	27 8	D = 36	27	8	31.5	4.18
	25 10	X = 1	25	10	30.5	4.06
	23 12	X = 1	23	12	29.5	3.93
	*21 14	X = 1	21	14	28.5	3.81
	19 16	X = 1	19	16	27.5	3.68
	17 18	X = 1	17	18	26.5	3.56
48″	FTT 41 6	C = 47.5	41	6	44.5	4.12
	39 8	D = 48	39	8	43.5	4.03
	37 10	X = 1	37	10	42.5	3.95
	*35 12		35	12	41.5	3.86
	33 14		33	14	40.5	3.77
	31 16		31	16	39.5	3.68
	29 18		29	18	38.5	3.60
	27 20		27	20	37.5	3.51
	25 22		25	22	36.5	3.42
	23 24		23	24	35.5	3.34
60″	FTT 47 12	C = 59.5	47	12	53.5	4.90
	45 14	D = 60	45	14	52.5	4.28
	43 16	X = 1	43	16	51.5	4.64
	39 20	X = 1	39	20	49.5	4.55
	*37 20	X = 1	37	22	48.5	4.47
	*35 24	X = 1	35	24	47.5	4.38
	33 26	X = 1	33	26	46.5	4..29
	31 28	X = 1	31	28	45.5	4.21
	*29 30	X = 1	29	30	44.5	4.12
	27 32	X = 1-3/16	27	32	43.5	4.03
	25 34	X = 1-3/16	25	34	42.5	3.95
	*23 36	X = 1-3/16	23	36	41.5	3.86
84″	FTT 65 18	C = 83.5	65	18	74.5	4.70
	63 20	D = 84	63	20	73.5	4.64
	61 22	X = 1	61	22	72.5	4.58
	59 24	X = 1	59	24	71.5	4.52
	57 26	X = 1	57	26	70.5	4.46
	55 28	X = 1	55	28	69.5	4.40
	*53 30	X = 1-3/16	53	30	68.5	4.34
	51 32	X = 1-3/16	51	32	67.5	4.28
	49 34	X = 1-3/16	49	34	66.5	4.22
	*47 36	X = 1-3/16	47	36	65.5	4.16
	45 38	X = 1-7/16	45	38	64.5	4.10
	43 40	X = 1-7/16	43	40	63.5	4.04
	41 42	X = 1-7/16	41	42	62.5	3.98
	39 44	X = 1-7/16	39	44	61.5	3.92
	37 46	X = 1-7/16	37	46	60.5	3.86
	*35 48	X = 1-7/16	35	48	59.5	3.80

* Components normally in stock

** Slight bearing protrusion at inside radius. Please consult factory for use with oversized product applications.

Standard Terms

QUOTATIONS: are valid 90 days from date of Quotation; unless stated otherwise.

ORDERS:

Orders Price Acceptance -– All orders are subject to verification by Flow-Turn.

Freight -– Shipment of Curves or Parts are FOB Union NJ; or specially noted.

Terms of Payment – all invoices at the date of shipment are as net 30 days. All payments to be in US Dollars.

Quality Assurance -– All products sold by Flow-Turn are subject to Flow-Turn general warranty protection.

Warranty of components and parts supplied by Flow-Turn.

Flow-Turn provides a standard warranty for all material and workmanship of its manufactured components and parts for 1 year from the date of shipment per unique serial number. Unauthorized modifications, additions or variations, from procedures and information contained in Flow-Turn Owner’s Manuals, and Product Data information, or any misuse, negligence, accident, product jam, or loading beyond rated capacity invalidates this warranty.

Clarifications:

A) All Belting supplied and specified by owner will be per belt manufacturer warranty.

B) Some OEM equipment specified by owner including motors and gear reducers will be subject to the manufacturer’s warranty.

C) Flow-Turn reserves the right to void its warranty where final destination and specific application are withheld and the product is improperly installed or maintained by others; product is modified without the consent from Flow-Turn.

D) Flow-Turn warranty is excluding any liability for incidental or consequential damages.

Products

Chain-Turn

Flat-Turn

Spiral-Turn

Square-Turn

Knife Roll-Turn

Chain Curves

Specifications

Options

Model Code

Standard Models

Flatop Curves

Specifications

Options

Model Code

Standard Models

Standard Terms

Request A Quote